A model is developed for hydrocarbon biodegradation, which includes saturated and unsaturated flow, multi-species transport, heat transport, and bacterial growth processes. Numerical accuracy of the model was tested against analytical solutions. The model was also verified against laboratory results for a saturated-flow problem and reasonable match was obtained. Expressions are proposed for inhibition due to water content and temperature fluctuations. Bioactivities under cyclic water content variation were studied under no-flow conditions. A quantitative approach was used to reconcile some of the apparent contradictory conclusions regarding the efficiency of biodegradation of soils under wetting and drying conditions. The efficiency depends on the nature of the oxygenation process. For cases involving the presence of dissolved oxygen and the absence of O2 vapor, subjecting the soil to constant water content close to its optimal value for degradation is most efficient. However, wetting and drying can enhance degradation if O2 is only provided through aeration or direct contact between air and the medium. Also presented are the results of a typical field application of the model and a discussion of the effects of tides, saturation inhibition, and heat inhibition. Other inhibition factors, such as pH or salinity, can be easily incorporated in the formulation. The quantitative approach developed here can be used in assessing bioremediation not only in tidal aquifers but also in areas where water-table or temperature effects are of significance. The approach can be useful in the design of remediation strategies under water-flow or no-flow conditions involving water content and temperature fluctuations.