Applications of titration using dual gold microband electrodes in generator-collector mode are presented. The main advantage is that the method dispenses with the need for accurate volume measurements and reagent preparation: rather than balancing of molar amounts, the fluxes of analyte and titrant are balanced instead. The titrant is generated electrochemically and the end-point is detected amperometrically by the appearance of a current due to the presence of the titrant at the other band. The aim is to show the versatility and capability of the method that employs disposable mass-produced electrodes and uses pulsed motion of the electrode before a measurement to renew the boundary conditions. The titration of ascorbic acid (vitamin C) with ferricyanide, which has been a model system, was extended to the determination of thiosulfate and sulfite with iodine and the determination of dichromate and permanganate with iron(II). The accuracy, limited by the present fabrication reproducibility of the disposable electrodes, is +/- 10%. The results demonstrate that the method is effective even with a very simple set-up, and the actual time needed for common titrations is significantly decreased. These examples demonstrate a comprehensive basis for further development and applications, including standard titrations in industry.