New biocompatible polymer surface coating for stents results in a low neointimal response

J Biomed Mater Res. 2000 Oct;52(1):193-8. doi: 10.1002/1097-4636(200010)52:1<193::aid-jbm25>3.0.co;2-7.

Abstract

Clinical studies indicate a more pronounced endothelial response after stent implantation than after balloon inflation. This might be related to the metal surface of the stent, and therefore it is speculated that coating of the stent might partially prevent hyperplasia. One coated and one noncoated Palmaz-Schatz stent were implanted in two separate coronary arteries of seven pigs. The coating was composed of methylmethacrylate (MMA) (hydrophobic, 70 mol %) and 2-hydroxyethyl methacrylate (HEMA) (hydrophilic 30 mol %). After sacrifice (3 weeks), cross sections were made of the stented areas. Vessel wall reaction was calculated both independently and dependently of local vessel wall injury due to the stent struts. Overall, vessel wall reaction of the coated stents was lower than that of the noncoated stents. The degree of hyperplasia was linearly related to the degree of stent-induced vessel wall injury. Analyses of all the struts showed that significantly less hyperplasia occurred in the coated versus noncoated stents. In this porcine coronary artery model, the MMA/HEMA stent coating resulted in significantly reduced vessel wall response. However, it remains to be determined whether this favorable outcome will also be present in humans.

MeSH terms

  • Animals
  • Biocompatible Materials*
  • Cell Division
  • Coronary Vessels / pathology
  • Coronary Vessels / surgery
  • Polymers*
  • Stents*
  • Surface Properties
  • Swine
  • Tunica Intima / pathology

Substances

  • Biocompatible Materials
  • Polymers