Objectives: Thermal expansion measurement of glassy materials is complicated by thermal history effects. Excess volume--trapped in quenched dental porcelains after firing--collapses via structural relaxation on first slow heating during conventional dilatometry, making the thermal expansion coefficient (alpha) obtained on first heating unreliable. The purpose of this study was to determine whether porcelain thermal expansion measurement at high thermal rates could minimize the influence of thermal history.
Methods: Eight thermal expansion specimens each of six body porcelains and the Component No. 1 (leucite-containing) frit prepared according to the patent by Weinstein et al. (US Patent No. 3,052,982) were subjected to three heat-cool conventional dilatometry runs at 3 degrees C/min, while eight thermal expansion specimens of each porcelain were reserved as untreated controls. Eight hollow, cylindrical specimens of the same brands were subjected to three heat-cool laser dilatometer thermal expansion runs at 600 degrees C/min, while eight cylindrical specimens of each porcelain were reserved as untreated controls. Thermal expansion data (25-500 degrees C) of all specimens were subjected to repeated measures analysis of variance.
Results: The alpha obtained on first slow heating was significantly lower than values for succeeding slow heat and cool runs in all porcelains (P < 0.001). High-rate alpha obtained on first heating was not significantly different from values of succeeding heat and cool runs in all porcelains (P > 0.05).
Significance: Conventional dilatometer measurements demonstrated occurrence of structural relaxation, as evidenced by the significant difference in the first heating and subsequent runs. High-rate laser dilatometry eliminated structural relaxation, thereby providing a thermal expansion measurement that is free of interference from thermal history effects.