Facile preparation protocol of magnetic mesoporous carbon acid catalysts via soft-template self-assembly method and their applications in conversion of xylose into furfural

Furfural is a valuable dehydration product of xylose. It has a broad spectrum of industrial applications. Various catalysts containing SO₃H have been reported for the conversion of xylose into furfural. Nevertheless, the multi-step preparation is tedious, and the catalysts are usually fine powders that are difficult to separate from the suspension. Novel magnetic mesoporous carbonaceous materials (Fe/MC) were successfully prepared via facile self-assembly in a single step. A facile subsequent hydrothermal sulfonation of Fe/MC with concentrated H₂SO₄ at 180°C gave mesoporous carbon bearing SO₃H groups (SO₃H@Fe/MC) without loss of the magnetic properties. Various techniques were employed to characterize the SO₃H@Fe/MC as a candidate catalyst. It showed strong magnetism due to its Fe particles and possessed a 243 m² g^-1 BET-specific surface area and a 90% mesopore volume. The sample contained 0.21 mmol g^-1 of SO₃H and gave a high conversion and an acceptable furfural yield and selectivity (100%, 45% and 45%, respectively) when used at 170°C for 1 h with γ-valerolactone as solvent. The catalyst was easily separated after the catalytic tests by using a magnet, confirming sufficient magneticstability. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.