Two-photon polymerization enables the extremely high resolution three-dimensional printing of micro-structures. To know the mechanical properties, and better still, to be able to adjust them is of paramount importance to ensuring the proper structural integrity of the printed products. In this work, the Young's modulus is measured on two-photon polymerized micro-cantilever bars. Optimizing the scanning trajectory of the laser focus points is important in alleviating distortion of the printed bars. By increasing the laser power and decreasing the inter-voxel distances we can double the Young's modulus. Post-curing with ultraviolet light can approximately quadruple the Young's modulus. However, the resulting modulus is still only about 0.3% of that of the bulk polymerized material.
Keywords: inter-voxel distance; post-fabricated curing; two-photon polymerization; young’s modulus.