Enhanced aqueous dissolution of a DNAPL source to characterize the source strength function

Simplified analytical solutions, developed as source strength functions (SSFs), are capable of describing the temporal dissolution of nonaqueous phase liquids in groundwater, which is useful for predicting source longevity and can serve as a guide for remedial activities. Here, SSF parameters were estimated by fitting enhanced aqueous dissolution data from a flow cell consisting of three injection and four extraction wells to analytical dissolution models (power law model (PLM) and equilibrium streamtube model (EST)) at a trichloroethene (TCE) contaminated site, Alameda Point, California. Both the PLM and the EST model were able to characterize the observed aqueous TCE dissolution during enhanced water flooding. Additional field activities conducted at the site included soil core collection, a recirculated partitioning tracer test, passive flux meter transects, and push-pull tracer tests. The additional site characterization data were used to independently estimate the observed SSF parameters using information such as the TCE mass, distribution and porous media heterogeneity. The exponential decay model (a subset of the PLM) accurately predicted the enhanced dissolution, likely because the site was significantly aged (most of the mass in the plume rather than in the source zone) or middle stage, and the mass in the source zone could be approximately estimated. The EST tracer-based model, when combined with data from the recirculated partitioning tracer test, soil cores, and the push-pull tracer test, was capable of accurately predicting the observed aqueous dissolution. The mass in the source zone and the fraction of contaminated flowpaths were the most important site characteristics, requiring the greatest accuracy to predict aqueous dissolution. Establishing steady state dissolution was essential to provide a more accurate estimate of the fraction contaminated and high resolution data from soil cores in the source zone were needed to estimate the mass present.