Magnetic mesoporous silica material was tested as adsorbent for removal of two usual colored compounds present in industrial wastewater. The magnetic mesoporous silica was synthesized by modified sol-gel method and characterized from the morpho-textural, structural and magnetic point of view. The specific surface area and the total pore volume indicate a good adsorption capacity of the material, and the obtained saturation magnetization strength value denotes a good magnetic separation from solution. The adsorption capacity of magnetic mesoporous silica increases with the increase of the initial dye concentration, and the removal efficiency of the dyes was dependent on the pH of the solution and decreased with increasing temperature. The pseudo-second-order kinetic model described best the adsorption mechanism, and the maximum adsorption capacities were determined from the Sips isotherm model, being 88.29 mg/g for Congo Red and 208.31 mg/g for Methylene Blue. A complete thermodynamic evaluation was performed, by determining the free energy, enthalpy and entropy, and the result showed a spontaneous and exothermic adsorption process. The recovery and reutilization of the adsorbent were estimated in five cycles of adsorption-desorption, and the results indicated a good stability and reusability of magnetic mesoporous silica. The new magnetic mesoporous silica can be easily separated from solution, via an external magnetic field, and may be effectively applied as adsorbent for elimination of dyes from colored polluted waters.
Keywords: Adsorption; Magnetic mesoporous silica; Multiple systems; Mössbauer spectroscopy; Sol-gel.
Copyright © 2020 Elsevier Ltd. All rights reserved.