Non-sweep DC component estimation method for a virtual-carrier assisted Kramers-Kronig receiver

Opt Express. 2024 Feb 26;32(5):7136-7146. doi: 10.1364/OE.512133.

Abstract

The Kramers-Kronig (KK) receiver has attracted much attention in short-range optical interconnection because of its ability to recover the phase of the signal from the intensity information through KK algorithm. In high-speed KK systems, such as virtual-carrier (VC) assisted ones, an alternating current (AC) coupled photo-detector (PD) is preferred due to relaxing the requirements of analog-to-digital converter (ADC) and electronic amplifier by filtering direct current (DC) component. However, the loss of the DC component will cause the KK algorithm to break down, so it is necessary to accurately recover DC value in the digital domain with multiple-sweep. In this paper, we propose what we believe is a novel non-sweep DC component estimation scheme based on optimized digital carrier-to-signal power ratio (OD-CSPR) method, which can accurately estimate the DC component with only 3-4 iterations in the scenario of VC-assisted KK receiver optical transmission. The scheme utilizes the one-dimensional search optimization algorithm based on golden section search and parabolic interpolation without sweeping. The simulation and experimental results of the proposed non-sweep OD-CSPR method show that the DC component can be estimated accurately in a large CSPR range, and the system performance is close to that of the conventional DC-sweep method. Compared with the typical defined digital CSPR (DD-CSPR) based optimization method, the proposed one can realize optical signal-to-noise ratio (OSNR) gains of 0.9 dB in the back-to-back (B2B) and 0.7 dB under 80 km fiber transmission scenarios respectively with a total bit rate of 160Gb/s.