Osseous neoplasia was identified in the proximal portion of the tibia and distal portion of the femur in an 11.75-year-old spayed female German Shepherd Dog. A tibial plateau leveling osteotomy, followed by application of a metal plate, had been performed on the affected limb 5.5 years earlier. Areas of osteolysis and periosteal proliferation were seen radiographically, with an intense area of osteolysis directly beneath the metal plate. Histologically, the tumor was identified as a poorly differentiated sarcoma. Extracellular and intracellular debris was seen histologically, and energy-dispersive x-ray analysis confirmed that this debris was metallic. On visual examination, areas of the underside of the metal plate that had been in contact with bone had a dull, roughened appearance, and scanning electron microscopy of these areas revealed multiple corrosion pits. The plate was strongly magnetic, suggesting that it contained ferrite, and metallographic examination of the plate revealed substantial differences in the chemical makeup of various parts of the plate. Microstructure analysis revealed that the plate consisted of an austenite matrix with a large fraction of ferrite. The plate was determined to be a cast 316L stainless steel implant, but it did not meet American Society for Testing Materials standards for implant-grade materials. The possibility that implant corrosion might have played a role in tumor development is of concern; however, a definitive association was not established.