The Effect of Multiple Applications of Phosphate-Containing Primer on Shear Bond Strength between Zirconia and Resin Composite

Occasional chipping can still occur with zirconia material despite its high strength. Emergency repairs can be accomplished using zirconia primer, adhesive agent, and resin composite when the fracture of zirconia exposes the zirconia framework. Phosphate-containing primers play an important role in zirconia surface treatment. The objective of this investigation was to evaluate the effect of multiple applications of phosphate-containing primer on shear bond strength between zirconia and resin composite. In this case, 78 zirconia discs were sandblasted by alumina particles; the zirconia was then randomized into six groups for single application and multiple applications of phosphate-containing primer according follows; group 1: no application, group 2: one application, group 3: two applications, group 4: three applications, group 5: four applications, and group 6: five applications. Adhesive was applied on the zirconia surface and the resin composite was bonded. Shear bond strength was assessed using a universal testing machine. The de-bonded surface was examined using a stereomicroscope. The shear bond strengths were statistically analyzed with one-way ANOVA and Bonferroni. Group 1 had the lowest shear bond strength with a significant difference compared to groups 2-6, whereas group 4 had the highest shear bond strength, with no significant difference compared to groups 5-6. The failure mode revealed 100% adhesive failure in all groups. In conclusion, to maximize shear bond strength at zirconia and resin composite interfaces, sandblasted zirconia surfaces should be treated with three applications of phosphate-containing primer prior to the adhesive agent.