Evaluation of scrap metallic waste electrode materials for the application in electrocoagulation treatment of wastewater

The constant need for sacrificial electrodes is one of the limitations of applying the EC in wastewater treatment. Accordingly, this study proposes a sustainable alternative in reusing scrap metallic wastes as electrode materials. Four different types of metallic wastes (beverage cans, used aluminum (Al) foil, scrap iron, and scrap mild steel) are proposed as sacrificial electrodes for grey water (GW) treatment using the EC technique. At electrical current densities (CD) ranging between 5 and 20 mA/cm², the treatment performance was evaluated for a reaction time of 10 min in terms of the removal efficiency of some key parameters such as color, turbidity, chemical oxygen demand (COD), and electrical conductivity, energy and material consumption, and metal contamination of GW from electrodes. The results demonstrated that using metallic wastes as sacrificial electrodes can achieve a considerable reduction in color, turbidity, COD, and electric conductivity of about 97.2%, 99%, 88%, and 89%, respectively. However, their reuse as electrodes revealed some important concerns. Al foil undergoes quick and substantial perforation and loss of surface area during electrolysis. The scrap iron and scrap mild steel were found to cause metal contamination by increasing Fe ions in the treated GW. Generally, metal scrap wastes can serve effectively as alternative sustainable electrodes. However, further research is recommended regarding the operating costs, which are considered crucial aspects of the EC process in terms of energy consumption and the most efficient method of fabricating the metallic wastes into a form suitable for reuse in the EC technique.