Failure Prediction in 3D Printed Kevlar/Glass Fiber-Reinforced Nylon Structures with a Hole and Different Fiber Orientations

This study examined the mechanical performance of 3D-printed, fiber-reinforced composites with a rectangular shape and a hole at one end. Nyon-6 was selected as a polymer matrix, and glass or Kevlar fibers were selected as continuous fibers due to their wide range of applications. Nylon is an engineering thermoplastic; reinforcing it with fibers, such as glass fiber or Kevlar, can significantly improve its mechanical properties. An analytical model was constructed based on the volume average stiffness approach to predict the mechanical properties of 3D-printed specimens. A numerical model was built to predict failure modes and damage in 3D-printed specimens with different fiber orientations. The stress-strain relationship was linear in all composites. For Kevlar-based composites, the maximum stress was 1.7 MPa, 3.62 MPa, 2.2 MPa, 1.0 MPa, and 1.4 MPa for the orientation angles of 0°, 22.5°, 45°, 67.5°, and 90°, respectively. Overall, Kevlar-based composites exhibited mechanical properties superior to those of glass-based composites. The effect of the fiber orientation was also different between the two systems. The simulation results predicted that the failure propagation begins in the areas close to the hole. Notably, the level of agreement between the simulated and experimental results varied depending on the fiber type and orientation, reflecting the complex interplay between multiple fibers, matrix interactions, and stress transfer.