The influence of hydrocarbon generation on the sealing capability of mudstone caprock rich in organic matter

To investigate the sealing capability of mudstone caprock during the evolution of organic matter (OM)-rich mudstone, a series of hydrous pyrolysis experiments were first conducted to examine the impact of hydrocarbon generation. The pore type, pore structure, porosity, and gas breakthrough pressure of pyrolytic residual samples were analyzed by field emission scanning electron microscopy, low pressure nitrogen adsorption measurements, porosimetry, and gas breakout core experiments. To model the environment at different depths, these six experiments on hydrous pyrolysis were performed at different temperatures, lithostatic pressures, and hydrodynamic pressures, while other experimental factors such as the original sample, heating time, and rate were kept constant. The results showed that during the thermal evolution process, hydrocarbons were generated from OM in mudstone, resulting in the formation of pores within the OM. Organic acids produced by hydrocarbon generation effectively dissolved minerals, leading to the creation of numerous dissolution pores. Changes in pore type led to changes in pore structure and porosity. The volume of micropores and macropores showed an increasing trend before reaching a Ro value of 1.41%. However, after passing this threshold, they began to decrease. The volume of mesopores showed a decreasing trend before reaching a Ro value of 1.32%. After 1.32%, they began to increase. The porosity was mainly affected by the pore volumes of the mesopores and macropores. The porosity exhibited two peaks: the first occurred at a Ro value of 0.72%, with a porosity level of 4.6%. The second occurred at a Ro value of 1.41% and a porosity level of 10.3%. The breakthrough pressure was a comprehensive reflection of these influences, and its trend exhibited a negative correlation with porosity (R² = 0.886). For two high values of porosity, the breakthrough pressure corresponded to two low values. Smaller values of the breakthrough pressure indicated a poorer sealing capability of the mudstone caprock. Overall, hydrocarbon generation in the mudstone affected the sealing capability. The mudstone in the studied area exhibited good sealing at Ro below 1.32%. However, once above the 1.32% threshold, the fluctuations of the breakthrough pressure values exhibited considerable variability, requiring a comprehensive evaluation to assess its sealing capability.