Compositional effects of clay-fly ash geopolymers on the sorption process of lead and zinc

Because long-term leachate penetration through a hydraulic barrier is unavoidable, active-passive liners are widely used to mitigate the migration of potential contaminants. Geopolymerization represents a viable method for metals removal, which simultaneously improves the properties of local clay to compensate for the lack of suitable soil in the design of active-passive liners. This study investigated how clay-fly ash geopolymers enhance the sorption of divalent lead [Pb(II)] and divalent zinc [Zn(II)] from leachate compared with an untreated clay. Two clay-fly ash geopolymers were synthesized from the mixtures containing 50 and 60% fly ash to the total solid mass and then activated by 10 M NaOH solutions. The influence of Na/fly ash ratios and activator content was also examined. The results indicate that a fly ash-based geopolymer could be a simple solution to increase the sorption capacity of local clay. A lower ratio of Na/fly ash and activator content, resulting in a higher porosity, led to a better performance for metal removal. According to the results of sorption isotherms and batch experiments, Pb(II) and Zn(II) exhibit different sorption behaviors affected by the compositions of synthesized clay-fly ash geopolymers, which could be adjusted to reach a proper sorption capacity. The results of the kinetic study also show that the heterogeneous matrix of the clay-fly ash geopolymers with different porosities led to mutual cooperation between reaction and diffusion-controlled steps for metal removal.