Small punch tensile/fracture test data and 3D specimen surface data on Grade 91 ferritic/martensitic steel from cryogenic to room temperature

Matthias Bruchhausen; Jean-Marc Lapetite; Stefan Ripplinger; Tim Austin

doi:10.1016/j.dib.2016.08.061

Small punch tensile/fracture test data and 3D specimen surface data on Grade 91 ferritic/martensitic steel from cryogenic to room temperature

Data Brief. 2016 Sep 3:9:245-51. doi: 10.1016/j.dib.2016.08.061. eCollection 2016 Dec.

Authors

Matthias Bruchhausen¹, Jean-Marc Lapetite¹, Stefan Ripplinger¹, Tim Austin¹

Affiliation

¹ European Commission, Joint Research Centre, Institute for Energy and Transport, 1755 LE Petten, The Netherlands.

Abstract

Raw data from small punch tensile/fracture tests at two displacement rates in the temperature range from -196 °C to room temperature on Grade 91 ferritic/martensitic steel are presented. A number of specimens were analyzed after testing by means of X-ray computed tomography (CT). Based on the CT volume data detailed 3D surface maps of the specimens were established. All data are open access and available from Online Data Information Network (ODIN)https://odin.jrc.ec.europa.eu. The data presented in the current work has been analyzed in the research article "On the determination of the ductile to brittle transition temperature from small punch tests on Grade 91 ferritic-martensitic steel" (M. Bruchhausen, S. Holmström, J.-M. Lapetite, S. Ripplinger, 2015) [1].

Keywords: Curve data; Ferritic/martensitic steel; Small punch tensile test; X-ray computed tomography.