5G Standalone and 4G Multi-Carrier Network-in-a-Box Using a Software Defined Radio Framework

Sensors (Basel). 2021 Aug 22;21(16):5653. doi: 10.3390/s21165653.

Abstract

In this work, an open Radio Access Network (RAN), compatible, scalable and highly flexible Software Defined Radio (SDR)-based Remote Radio Head (RRH) framework is proposed and designed. Such framework can be used to implement flexible wideband radio solutions, which can be deployed in any region, have common radio management features, and support various channel bandwidths. Moreover, it enables easier access for researchers to nonsimulated cellular networks, reduce system development time, provide test and measurement capabilities, and support existing and emerging wireless communication technologies. The performance of the proposed SDR framework is validated by creating a Network-in-a-Box (NIB) that can operate in multiband multicarrier 4G or 5G standalone (SA) configurations, with an output power of up to 33 dBm. Measurement results show, that the 4G and 5G NIB can achieve, respectively, up to 883 Mbps and 765 Mbps downlink data transfer speeds for a 100 MHz aggregated bandwidth. However, if six carriers are used in the 4G NIB, 1062 Mbps downlink data transfer speed can be achieved. When single user equipment (UE) is used, maximum uplink data transfer speed is 65.8 Mbps and 92.6 Mbps in case of 4G and 5G, respectively. The average packet latency in case of 5G is up to 45.1% lower than 4G. CPU load by the eNodeB and gNodeB is proportional to occupied bandwidth, but under the same aggregated DL bandwidth conditions, gNodeB load on the CPU is lower. Moreover, if only 1 UE is active, under same aggregated bandwidth conditions, the EPC CPU load is up to four times lower than the 5GC.

Keywords: 4G; 5G; NIB; RAN; RRH; SDR; aggregation; framework; multicarrier; standalone.