The shear behavior of innovative engineered cementitious composites (ECC) members with a hybrid mix of polyvinyl alcohol (PVA) and polypropylene (PP) fibers is examined. The overall objective of the investigation is to understand the shear behavior of ECC beams with different mono and hybrid fiber combinations without compromising the strength and ductility. Four different configurations of beams were prepared and tested, including 2.0% of PP fibers, 2.0% of PVA fibers, 2.0% of steel fibers and hybrid PVA and PP fibers (i.e., 1% PP and 1% PVA). In addition to the tests, a detailed nonlinear finite element (FE) analysis was accomplished using the commercial ABAQUS software. The validated FE model was used to perform an extensive parametric investigation to optimize the design parameters for the hybrid-fiber-reinforced ECC beams under shear. The results revealed that the use of hybrid PVA and PP fibers improved the performance by enhancing the overall strength and ductility compared to the steel and PP-fiber-based ECC beams. Incorporating hybrid fibers into ECC beams increased the critical shear crack angle, indicating the transition of a failure from a brittle diagonal tension to a ductile bending.
Keywords: PVA fibers; engineered cementitious composites (ECC); finite element analysis; hybrid fibers; polypropylene fibers; shear behavior.