Microanastomosis is a surgical procedure used to reconnect two blood vessels using sutures. The optimal microanastomosis may be predicted by assessing the factors that influence this invasive procedure. Blood flow and hemodynamics following microanastomosis are important factors for the successful longevity of this operation. How is the blood flow affected by the presence of sutures? Computational Fluid Dynamics (CFD) is a powerful tool that permits the estimation of specific quantities, such as fluid stresses, that are hardly measurable in vivo. In this study, we propose a methodology which evaluates the alterations in the hemodynamic status due to microanastomosis. A CFD model of a reconstructed artery has been developed, based on anatomical information provided by intravascular ultrasound and angiography, and was used to simulate blood flow after microanastomosis. The 3D reconstructed arterial segments are modeled as non-compliant 1.24 - 1.47 mm diameter ducts, with approximately 0.1 mm arterial thickness. The blood flow is considered laminar and the no-slip condition is imposed on the boundary wall, which is assumed to be rigid. In analyzing the results, the distribution of the wall shear stress (WSS) is presented in the region of interest, near the sutures. The results indicate that high values of WSS appear in the vicinity of sutures. Such regions may promote thrombus formation and subsequently anastomotic failure, therefore their meticulous study is of high importance.