This article deals with the assessment of the hazards of dust waste generated by modern CNC (computer numerical control) technologies from the processing of resin-containing plastic composites. The change of the original material into dusty waste predicts the emergence of new hazardous characteristics such as flammability, explosiveness and adverse effects on employee health. The aim of this article is to determine the experimental measurement of dust particle size, its thermal degradation and safety characteristics. Sieve analysis showed that the representative sample contained a 93.8% weight of particles with a size of less than 0.4 mm. Three degrees of thermal degradation of industrial dust samples and heat production (exo reaction ∑ΔH = 9172.9 J/g) were determined by TG (thermogravimetry), DTA (differential thermal analysis) and DSC (differential scanning calorimetr) methods. The measurement safety characteristics such as the lower explosion limit, the maximum explosion pressure, the maximum pressure rise rate, and the calculated cubic constant confirmed that the dust is an explosive, and is determined as explosion class St1 (determined by Cubic constant).
Keywords: dust clouds; hazard; plastic; safety characteristics.