Hysteresis data of planar perovskite solar cells fabricated with different solvents

You-Hyun Seo; Eun-Chong Kim; Se-Phin Cho; Seok-Soon Kim; Seok-In Na

doi:10.1016/j.dib.2017.11.064

Hysteresis data of planar perovskite solar cells fabricated with different solvents

Data Brief. 2017 Nov 22:16:418-422. doi: 10.1016/j.dib.2017.11.064. eCollection 2018 Feb.

Authors

You-Hyun Seo¹, Eun-Chong Kim¹, Se-Phin Cho¹, Seok-Soon Kim², Seok-In Na¹

Affiliations

¹ Professional Graduate School of Flexible and Printable Electronics and Polymer Materials Fusion Research Center, Chonbuk National University, Jeonju-si, Jeollabuk-do 561-756, Republic of Korea.
² Department of Nano & Chemical Engineering, Kunsan National University, 290-2, Miryong-dong, Gunsan-si, Jeollabuk-do 573-701, Republic of Korea.

Abstract

In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiO_X/perovskite /PC₆₁BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm² (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article "High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance" (You-Hyun Seo et al., 2017 [1]).