Mechanical Properties and Failure Mechanism of Anchored Bedding Rock Material under Impact Loading

In view of the problem that anchored bedding rock material is prone to instability and failure under impact loading in the process of deep coal mining, and taking the lower roadway of a deep 2424 coal working face in the Suncun coal mine as the engineering background, a mechanical model of anchored bedding rock material was established, and the instability criterion of compression and shear failure of anchored bedding rock material was obtained. Then, the separated Hopkinson pressure bar was used to carry out an impact-loading test on the anchored bedding rock material, and the dynamic mechanical properties of the rock with different anchoring modes and bolt bedding angles were studied; the evolution law of the strain field of the anchored bedding rock material was also obtained. The results show the following: (1) The bolt support could effectively improve the dynamic load strength and dynamic elastic modulus of the rock material with anchorage bedding, the degree of improvement increased with the increase in the angle of the bolt bedding, and the full anchorage effect was much higher than the end anchorage effect was. (2) The bolt bedding angle and anchorage mode greatly influenced crack development and displacement characteristics. After an impact, the bedding rock material had obvious shear displacement along the bedding direction, and obvious macroscopic cracks were produced in the bedding plane. The research results offer theoretical guidance to and have reference significance for deep roadway anchorage support engineering.