Background: To develop and validate a simple and consistent reversed phase high performance liquid chromatography (RP-HPLC) method for the estimation of Levonorgestrel (LNG) drug from silicone based intrauterine device.
Methods: Sample solution was prepared using tetrahydrofuran (THF) as solvent for the drug extraction, and RP-HPLC analysis was performed using Luna C18 analytical column (150 × 4.6 mm, 5 μm, 100 Å - Phenomenex), with a mobile phase consisting of a mixture of acetonitrile and water (50:50, v/v) at a flow rate of 1.0 ml/min and injection volume of 20 μl. Detection was carried out at 241 nm in PDA detector, with a total run time of 15 min. The method was validated in accordance with ICH guidelines. Method applicability was tested for optimizing formulation using quality-by-design approach, to check the stability and content uniformity of levonorgestrel-silicone mixture (core blend), and quantifying the amount of LNG from commercially available silicone based formulation.
Results: The retention time for LNG drug was obtained at 8.5 min (± 0.3 min). A linear relationship was observed over the concentration range of 2.6-15.6 μg/ml with the correlation coefficient (r) value 0.9999. The method was found to be precise within the acceptable limit (RSD < 2%) and the drug recovery from the intrauterine device was found in the range 99.78-100.0%. Content uniformity for different prototypes developed was observed in the range of 91.6-101.4%, and assay of optimized core blend was in the range of 97.78-106.79% during the 10 days of retention period for stability studies.
Conclusion: The validated method is found to be a simple, accurate, precise, reproducible, and hence can be used for the routine analysis of LNG such as in-process, quality control and stability assays of silicone based intrauterine devices by RP-HPLC.
Keywords: Intrauterine device; Levonorgestrel; Quality by design (QbD); Silicone; Validation.