Surgical stabilization of multiple rib fractures in 5 male patients was successfully achieved with the use of orthopedic A-O metalic plates, which are called reconstruction plates. In each patient, we prevented deformity of the rib cage and flail chest which frequently occurs after multiple rib fractures. Three of these patients received emergency operations because of severe hemopneumothorax and flail chest due to crushing injuries to the chest. They were treated by the standard thoracotomy, hemostasis of intrapleural bleeding, and stabilization of fractured ribs with reconstruction plates, in addition two of the patients underwent a single lobectomy to control the pulmonary hemorrhage. Another two patients were treated with mechanical ventilation and closed-tube thoracotomy following the chest trauma because their thoracic bleeding from drainage tubes was tolerable. But flail chest and respiratory insufficiency did not improve, in spite of positive controlled ventilation as a mode of internal pneumatic stabilization. Then surgical stabilization of the fractured ribs with these plates was carried out ten to twelve days after the accidents in each case. All patients tolerated the surgical procedures well and were successfully removed from the respirator, demonstrating complete stability of the chest wall. The long metal reconstruction plates with many perforations were very useful for the external fixation of segmentary fractured ribs as an external brace. This was because they were long enough to cover the whole length of the fractured ribs and moderately soft enough to be appropriately bent or twisted by hand at the time of operation. Moreover a number of holes in it allowed the suture to pass through the plate and rib, avoiding displacement of the prosthesis. This is the first report which describes the usefulness of orthopedic reconstruction plates for the stabilization of multiple rib fractures.