Current advances and gaps in knowledge on personalizing masks for non-invasive respiratory support: a scoping review

Respir Care. 2024 May 10:respcare.11886. doi: 10.4187/respcare.11886. Online ahead of print.

Abstract

Non-invasive respiratory support delivered through a face mask has become a cornerstone treatment for adults and children with acute or chronic respiratory failure. However, an imperfect mask fit using commercially available interfaces is frequently encountered, which may result in patient discomfort and treatment inefficiency or failure. To overcome this challenge, over the last decade increasing attention has been given to the development of personalized face masks, which are custom made to address the specific facial dimensions of an individual patient. With this scoping review we aim to provide a comprehensive overview of the current advances and gaps in knowledge regarding the personalization of ventilation masks. We performed a systematic search of the literature, and identified and summarized a total of 23 studies. Most studies included were involved in the development of nasal masks. Studies targeting adult respiratory care mainly focused on chronic (home) ventilation and included some clinical testing in a relevant subject population. In contrast, pediatric studies focused mostly on respiratory support in the acute setting, while testing was limited to bench or case studies only. Most studies were positive regarding the performance (i.e. comfort, level of air leak and mask pressure applied to the skin) of personalized masks in bench testing or in human, healthy or patient, subjects. Advances in the field of 3D scanning and soft material printing were identified, but important gaps in knowledge remain. In particular, more insight into cushion materials, headgear design, clinical feasibility and cost-effectiveness is needed, before definite recommendations can be made regarding implementation of large scale clinical programs that personalize non-invasive respiratory support masks for adults and children.

Keywords: 3D printing; continuous positive airway pressure; customization; face mask; home ventilation; intensive care; non-invasive ventilation; obstructive sleep apnea; respiratory failure.

Publication types

  • Review