A novel potentiometric screen-printed electrode based on crown ethers/nano manganese oxide/Nafion composite for trace level determination of copper ion in biological fluids

Mikrochim Acta. 2024 May 8;191(6):313. doi: 10.1007/s00604-024-06394-1.

Abstract

Copper levels in biological fluids are associated with Wilson's, Alzheimer's, Menke's, and Parkinson's diseases, making them good biochemical markers for these diseases. This study introduces a miniaturized screen-printed electrode (SPE) for the potentiometric determination of copper(II) in some biological fluids. Manganese(III) oxide nanoparticles (Mn2O3-NPs), dispersed in Nafion, are drop-casted onto a graphite/PET substrate, serving as the ion-to-electron transducer material. The solid-contact material is then covered by a selective polyvinyl chloride (PVC) membrane incorporated with 18-crown-6 as a neutral ion carrier for the selective determination of copper(II) ions. The proposed electrode exhibits a Nernstian response with a slope of 30.2 ± 0.3 mV/decade (R2 = 0.999) over the linear concentration range 5.2 × 10-9 - 6.2 × 10-3 mol/l and a detection limit of 1.1 × 10-9 mol/l (69.9 ng/l). Short-term potential stability is evaluated using constant current chronopotentiometry (CP) and electrochemical impedance spectroscopy (EIS). A significant improvement in the electrode capacitance (91.5 μF) is displayed due to the use of Mn2O3-NPs as a solid contact. The presence of Nafion, with its high hydrophobicity properties, eliminates the formation of the thin water layer, facilitating the ion-to-electron transduction between the sensing membrane and the conducting substrate. Additionally, it enhances the adhesion of the polymeric sensing membrane to the solid-contact material, preventing membrane delamination and increasing the electrode's lifespan. The high selectivity, sensitivity, and potential stability of the proposed miniaturized electrode suggests its use for the determination of copper(II) ions in human blood serum and milk samples. The results obtained agree fairly well with data obtained by flameless atomic absorption spectrometry.

Keywords: Copper(II) in biological fluids; Copper(II) potentiometric sensor; Crown ethers; Manganese(III) oxide nanoparticles; Method validation; Screen-printed electrode.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Copper* / chemistry
  • Crown Ethers* / chemistry
  • Electrodes*
  • Fluorocarbon Polymers* / chemistry
  • Graphite / chemistry
  • Humans
  • Limit of Detection*
  • Manganese Compounds* / chemistry
  • Oxides* / chemistry
  • Potentiometry* / instrumentation
  • Potentiometry* / methods

Substances

  • Copper
  • Fluorocarbon Polymers
  • perfluorosulfonic acid
  • Oxides
  • Manganese Compounds
  • manganese oxide
  • Crown Ethers
  • Graphite