Laser-induced crystallization is a novel alternative to classical methods for crystallizing organic molecules but requires a judicious choice of experimental parameters for the onset of crystallization to be predictable. This study investigated the impact of the laser repetition rate on the time delay from the start of the pulsed laser illumination to the initiation of crystallization, the so-called induction time. A supersaturated urea solution was irradiated with near-infrared (λ = 1030 nm) laser pulses of pulse duration τ = 5 ps at a pulse energy of approximately E = 340 μJ while varying the repetition rate from 10 to 20,000 Hz. The optimal rate discovered ranged from 500 Hz to 1 kHz, quantified by the measured induction time (median 2-5 s) and the mean probability of inducing a successful crystallization event (5 × 10-2%). For higher repetition rates (5-20 kHz), the mean probability dropped to 3 × 10-3%. The reduced efficiency at high repetition rates is likely due to an interaction between an existing thermocavitation bubble and subsequent pulses. These results suggest that an optimized pulse repetition rate can be a means to gain further control over the laser-induced crystallization process.
© 2024 The Authors. Published by American Chemical Society.