Natural plant fiber-reinforced bio-based polymer composites are widely attracting attention because of their economical, readily available, low carbon, and biodegradable, and showing promise in gradually replacing petroleum-based composites. Nevertheless, the fragile interfacial bonding between fiber and substrate hinders the progression of low-cost and abundant sustainable high-performance biocomposites. In this paper, a novel high-performance sustainable biocomposite was built by introducing a high density strong hydrogen-bonded bridging interface based on tannic acid (TA) between bamboo fibers (BFs) and PBSA. Through comprehensive analysis, this strategy endowed the biocomposites with better mechanical properties, thermal stability, dynamic thermo-mechanical properties and water resistance. The optimum performance of the composites was achieved when the TA concentration was 2 g/L. Tensile strength as well as modulus, flexural strength as well as modulus, and impact strength improved by 22 %, 10 %, 15 %, 35 %, and 25 % respectively. Additionally, the initial degradation temperature(Tonset) and maximum degradation temperature(Tmax) increased by 12.07 °C and 14.8 °C respectively. The maximum storage modulus(E'), room temperature E', and loss modulus(E")elevated by 199 %, 75 %, and 181 % respectively. Moreover, the water absorption rate decreased by 59 %. The strong hydrogen-bonded bridging interface serves as a novel model and theory for biocomposite interface engineering. At the same time, it offers a promising future for the development of high performance sustainable biocomposites with low cost and abundant biomass resources and contributes to their wide application in aerospace, automotive, biomedical and other field.
Keywords: Bamboo fibers; Interface compatibility; Poly (butylene succinate-co-butylene adipate); Strong hydrogen-bonded bridging interface; Tannic acid.
Copyright © 2024 Elsevier B.V. All rights reserved.