The electrochemical oxidation of hydrogen sulfide (H2S) has shown its potential for the real application of H2S emission control in wastewater treatment. In this study, a surface corrosion treatment of stainless steel (SS) was optimized by regulate Ni content in the oxide film on the SS AISI 304 surface for sulfide removal. The X-ray photoelectron spectroscopy and linear sweeping voltammetry results indicated a higher Ni content in the oxide film of surface-oxidized stainless steel (SOSS) attributed to a higher sulfide removal potential. Sulfide removal experiment results showed that SS-150 (with 150 s anodic pretreatment) anodes achieved the highest Ni content of 69% with the best sulfide removal efficiency, i.e., 97% within 48 h, which increased by 20% compared to the untreated SS. This study also demonstrated a strategy for in situ removal of deposited sulfur on the anodes by cathodic treatment at -0.38 V vs. RHE to alleviate the common issue of sulfur passivation. Density functional theory (DFT) calculation revealed that NiOOH was the major active species in SS-150 oxide film for a faster sulfide removal rate. The study developed a SS surface modification process for Ni content regulation that contributed to better sulfide removal efficiency.
Keywords: Catalyst; DFT calculation; Electrochemical oxidation; Electrode regeneration; Sulfide oxidation; Sulfur recovery.
Copyright © 2024. Published by Elsevier B.V.