Carbon neutral or negative mining can potentially be achieved by integrating carbon mineralization processes into the mine design, operations, and closure plans. Brucite [Mg(OH)2] is a highly reactive mineral present in some ultramafic mine tailings with the potential to be rapidly carbonated and can contain significant amounts of ferrous iron [Fe(II)] substituted for Mg; however, the influence of this substitution on carbon mineralization reaction products and efficiency has not been thoroughly constrained. To better assess the efficiency of carbon storage in brucite-bearing tailings, we performed carbonation experiments using synthetic Fe(II)-substituted brucite (0, 6, 23, and 44 mol % Fe) slurries in oxic and anoxic conditions with 10% CO2. Additionally, the carbonation process was evaluated using different background electrolytes (NaCl, Na2SO4, and Na4SiO4). Our results indicate that carbonation efficiency decreases with increasing Fe(II) substitution. In oxic conditions, precipitation of ferrihydrite [Fe10IIIO14(OH)2] and layered double hydroxides {e.g., pyroaurite [Mg6Fe2III(OH)16CO3·4H2O]} limited carbonation efficiency. Carbonation in anoxic environments led to the formation of Fe(II)-substituted nesquehonite (MgCO3·3H2O) and dypingite [Mg5(CO3)4(OH)2·∼5H2O], as well as chukanovite [Fe2IICO3(OH)2] in the case of 23 and 44 mol % Fe(II)-brucite carbonation. Carbonation efficiencies were consistent between chloride- and sulfate-rich solutions but declined in the presence of dissolved Si due to the formation of amorphous SiO2·nH2O and Fe-Mg silicates. Overall, our results indicate that carbonation efficiency and the long-term fate of stored CO2 may depend on the amount of substituted Fe(II) in both feedstock minerals and carbonate products.
Keywords: brucite; carbon dioxide removal; carbon mineralization; carbonation efficiency; greenhouse gas emissions; iron; mining.