Here, we compare the amount and morphology of silver (Ag) nanostructures electrodeposited at varied potentials and times in the presence of cetyltrimethylammonium bromide (CTAB) onto glass/indium tin oxide (glass/ITO) electrodes functionalized with mercaptopropyltrimethoxysilane (MPTMS) and coated or not coated with 4 nm average diameter Au nanoparticle (Au NP) seeds. There is a significantly larger amount of Ag deposited on the seeded electrode surface compared to that in the nonseeded electrode at potentials of -150 to -300 mV (vs Ag/AgCl) since the Au NP seeds act as catalysts for Ag deposition. At more negative overpotentials of -400 to -500 mV, the amount of Ag deposited on both electrodes is similar because the deposition kinetics are fast enough on glass/ITO that the Au seed catalyst does not make as big of a difference. Ag nanorods (NRs) and nanowires (NWs) form on the seeded surfaces, especially at more positive potentials, where deposition primarily occurs on the Au seed catalysts. Deposition of Ag onto the Au seeds appears as a separate peak in the voltammetry. This procedure mimics the seed-mediated growth of Ag NRs observed in solution in the presence of CTAB using ascorbic acid as a reducing agent. The yield, length, and aspect ratio of the Ag NRs/NWs depend on the deposition time and potential with the average length ranging from 300 nm to 3 μm for times of 30-120 min and potentials of -150 to -200 mV. The electrochemical seed-mediated growth of Ag NRs/NWs across electrode gaps could find use for resistive and surface-enhanced Raman-based sensing and molecular electronic applications.