A hybrid electrocoagulation-biocomposite adsorption system for the decolourization of dye wastewater

Jain Teresa Jose; Priya K L; Suchith Chellappan; Sreelekshmi S; Anakha Remesh; Varsha Venkidesh; Krishna A J; Arivalagan Pugazhendhi; S Selvam; Baiju V; Indu M S

doi:10.1016/j.envres.2024.118759

A hybrid electrocoagulation-biocomposite adsorption system for the decolourization of dye wastewater

Environ Res. 2024 Mar 25;252(Pt 1):118759. doi: 10.1016/j.envres.2024.118759. Online ahead of print.

Authors

Affiliations

¹ Environmental Engineering and Management, UKF College of Engineering and Technology, Kollam, Kerala, India.
² Department of Civil Engineering, TKM College of Engineering, Kollam, Kerala, India. Electronic address: klpriyaram@gmail.com.
³ Department of Civil Engineering, TKM College of Engineering, Kollam, Kerala, India.
⁴ School of Engineering, Lebanese American University, Byblos, Lebanon; Centre for Herbal Pharmacology and Environmental Sustainability, Chettinad Hospital and Research Institute, Chettinad Academy of Research and Education, Kelambakkam-603103, Tamil Nadu, India.
⁵ Department of Geology, V.O. Chidambaram College, Tuticorin -628008, Tamil Nadu, India.
⁶ Department of Mechanical Engineering, TKM College of Engineering, Kollam, Kerala, India.

PMID: 38537741
DOI: 10.1016/j.envres.2024.118759

Abstract

Among the various methods for the removal of azo dye, electrocoagulation is recognized to be highly efficient. However, the process is associated with high operation and maintenance cost, which demands the need for reducing the electrolysis time without compromising the performance efficiency. This can be achieved by adopting hybrid electrocoagulation process with a low-cost but effective process, such as adsorption. The study investigated the performance of a hybrid electrocoagulation-biocomposite system (H-EC-BC) for removing methyl orange dye. Firstly, the operating parameters of electrocoagulation process were optimized and a removal efficiency of 99% has been attained using Fe-SS electrodes at a pH of 6 for a reaction time of 30 min. The performance of EC process was found to be decreasing with increase in dye concentration. Secondly, biocomposite was synthesized from Psidium guajava leaves and characterized using SEM, FTIR, EDAX, and XRD analyses. The results suggested that it is having a porous nature and cellulose crystal structure and confirmed the presence of chemical elements such as carbon (65.2%), oxygen (29.1%) as primary with Fe, Cl, Na and Ca as secondary elements. The performance of the biocomposite was evaluated for the dye adsorption using spectrophotometric methods. Various operating parameters were optimized using experimental methods and a maximum removal efficiency of 65% was achieved at a pH of 6, dosage of 5 g/L and an adsorption contact time of 120 min. The maximum efficiency (92.78%) was obtained with Fe-SS electrodes and KCl as a sustaining electrolyte under acidic circumstances (pH 6). The biocomposite was observed to be more efficient for higher dye concentration. Langmuir and Freundlich adsorption isotherms were fitted with the experimental results with R² values as 0.926 and 0.980 respectively. The adsorption kinetics were described using Pseudo-first and Pseudo-second order models, wherein Pseudo-second order model fits the experimental results with R² value of 0.999. The energy consumption of electrocoagulation (EC) process in the hybrid H-EC-BC system was compared to that of a standard EC process. The results demonstrated that the hybrid system is approximately 7 times more energy efficient than the conventional process, thereby implicating its adaptability for field application.

Keywords: Adsorption; Electrocoagulation; Methyl orange; Psidium guajava.