Free-standing films without the need for any support materials attract attention because of their excellent flexibility in use and ability to be transferred to various substrates. However, free-standing films containing large amounts of inorganic crystalline particles are hard to achieve due to their low strength. In this study, we found the possibility of preparing a free-standing composite film of CuS/polyvinylpyrrolidone (PVP) at a large loading of CuS (>50%) from a concentrated colloidal dispersion of CuS nanoparticles modified with PVP. Despite the large amount of inorganic crystals contained in the free-standing film, the film was strong enough to be handled without any support materials. As a proof-of-concept application of the free-standing film, a solar water evaporation experiment was performed. The CuS/PVP free-standing film exhibited photothermal conversion under light illumination to generate heat and accelerate water evaporation, achieving an evaporation rate of 4.35 kg·m-2 h-1 and an evaporation efficiency of 96.3% at a power density of 3 suns. In addition, thanks to the free-standing feature, one side of the CuS/PVP film could be hydrophobized with polydimethylsiloxane to form a Janus thin film, allowing for floating on the water surface. As a result, effective water evaporation was achieved because of the selective evaporation of water from the air/water interface.
Keywords: colloidal dispersion; copper sulfide; free-standing film; hybrid film; photothermal conversion; solar water evaporation.