In order to solve the problem that the skid resistance of concrete pavement in tunnel deteriorates rapidly, which is easy to cause traffic accidents, the anti-skid rapid elevation technology of surface treatment is proposed. Wear tests were used to investigate the effects of concrete surface roughness, properties of modified emulsified asphalt binder and anti-skid fine aggregate type on long-term skid resistance of treated surfaces. The results show that the four coarsening methods of fine milling, milling, grooving and brooming can improve the skid resistance of concrete, and the skid resistance durability of fine milling and milling is better. The adhesive property of modified emulsified asphalt is the best when the content of water-based epoxy resin is 20%. In different aggregates, the anti-skid effect is better when silicon carbide is used as anti-skid aggregate and the particle size is 0.6mm:0.3mm = 2:3. The method of fine milling of concrete surface + spraying epoxy emulsified asphalt + spreading silicon carbide can effectively improve the anti-skid performance of the original concrete pavement, and the feasibility of the scheme is verified by the test road. The research results have a good reference value for improving the skid resistance of tunnel concrete pavement.
Copyright: © 2024 Lei et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.