In order to realize the lightweight design of the transmission system, the braided composite material is applied to the two-stage gear transmission system. According to the structural characteristics of the two-stage gear reducer box, the whole box is designed to be assembled with the braided base and the box wall. Woven composite materials are applied to the web parts of mixed metal composite gears to realize the design goal of lightweight gears. Then, under the assumption of ignoring the influence of friction, bearings and other factors on the system, the dynamic model of the two-stage gear transmission system considering the box is established. By normalizing and dimensionless processing of the equations, the dimensionless differential equations of motion are obtained. The fourth-order Runge-Kutta method is used to analyze the relationship between the connection parameters and the dynamic characteristics of the system under the two working conditions of rigid and flexible connection between the composite base and the box wall.Through the analytical analysis of vibration displacement of two-stage gear reducer and box, the theoretical basis is found for the numerical analysis results. Finally, the dynamic characteristics of the transmission system are studied by vibration resonance analysis through high and low frequency interference. It is found that in a certain frequency range, with the decrease of the mass and moment of inertia of the transmission parts corresponding to the mixed metal composite gear, the amplitude-frequency characteristic Q of the lightweight gear and gearbox transmission system is slightly lower than that of the common gear and gearbox system, and the stability of the system is increased, and the dynamic characteristics of the system are improved.
Keywords: Braided composite; Dynamic characteristic analysis; Mixed metal gear; Vibration resonance.
© 2024. The Author(s).