This study presents a novel Aluminium foil-based electrode characterized by its affordability, flexibility, and ease of modification with carboxylic moiety-containing organic molecules. Upon foil modification with Aluminium nanoparticles and EDTA (AlNP-EDTA/AlE), the modified electrode exhibits remarkable activity in the oxidation of lead at potentials around -0.4 V. The lead signal is derived from the oxidation of lead deposited on the electrode surface using anodic stripping voltammetry (ASV). The addition of EDTA to AlNP/AlE increased the anodic peak current of lead by more than 500 %. The surface characterization of the electrode was performed by scanning electron microscopy (SEM) and infrared spectroscopy (IR), while its electroactive properties were evaluated by cyclic voltammetry (CV) and electrical impedance spectroscopy (EIS). Optimal operating parameters include pH 2.1, square-wave voltammetry (SWV) with an accumulation time of 60 s and an accumulation potential of -0.8 V. A low detection limit of 0.20 µmol/L and a relative standard deviation (RSD) of 3.0 % were achieved using five different electrodes. The effectiveness of AlNP-EDTA/AlE was further demonstrated with consistent results in biological samples spiked with Pb.
Keywords: Al Nanoparticles; Aluminium Foil Electrode; Lead Detection; Square-Wave Voltammetry.
Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.