In this work, the characteristics of the exothermic reaction between ammonium nitrate and sulfide ores were explored using COMSOL Multiphysics. This reaction can cause an increase in temperature within the blast holes of sulfide mines and can potentially induce premature explosions of the explosives. Initially, simulations were conducted to observe temperature variations in blast holes before and after the loading of explosives. Then, the impact of blast hole diameter and initial temperature on the thermal environment was assessed. Subsequent analysis focused on the fluid field's dynamics, examining flow rate changes and the concentration of signature gases produced by the reaction. Additionally, the influence of blast hole diameter on these parameters was evaluated. The results show that the blast hole temperature is positively related to its diameter and initial temperature. When the diameter of the blast hole is 120 mm and 165 mm, a significant change in flow rate is observed, with a trend of being rapidly increased and then rapidly decreased. The production of NH3 is always found to be greater than that of the other two gases. As for NO and SO2, their production is characterized by an approximate ratio of 1:2. The numerical simulation results can provide important theoretical guidance for the spontaneous detonation of blast hole in sulfide mines.
Keywords: Ammonium nitrate; Environmental pollution; Explosives; Numerical simulation; Spontaneous detonation; Sulfide ores.
© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.