A horizontal biotrickling filter (HBTF) was designed to understand the toluene removal process and microbial community structures. The start-up time of the HBTF, immobilized by the dominant fungi was only about 6 days and the toluene removal efficiency was found to be more than 95% when the inlet toluene concentration remained at around 1560.0 mg/m3. In the stable operation stage of the HBTF, based on not greatly reducing the removal efficiency, a simple and convenient periodic commutation was adopted to reduce the pressure drop (△P) and regulate the distribution of microorganisms in the packing area of the HBTF. The △P decreased from about 90 Pa to 10 Pa after the commutation, which indicated its feasibility. The performance of the HBTF was improved by changing the inlet direction of waste gas flow. When the inlet concentration of toluene was about 640 mg/m3, the removal efficiency was nearly 70.0% before commutation and it remained 95.0-98.0% after commutation. Microbial abundance and diversity analysis showed that the corresponding Shannon-Weiner index was 2.73 and 1.84, respectively. The front section of the HBTF, which was exposed to toluene earlier, consistently exhibited higher microbial diversity than that in the back section. Following commutation, microbial diversity decreased in both the front and back sections, with a maximum decline of around 50%. The main fungi treating toluene were Aplanochytrium, Boletellus, and Exophiala.
Keywords: Commutation; Horizontal biotrickling filter; Microbial diversity; Pressure drop; Toluene.
© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.