Melt expansion followed by compression has been utilized for high-speed filling. In general, this technology was developed for a machine level. Recently, mold-level technology has been tried. In this study, an expansion injection molding process was examined, which included compressing a polymer melt through cylinder action facilitated by the movement of the platen, followed by the expansion of the polymer melt into a mold cavity. A mold system including temperature control and valve actions, similar to hot runner systems, was designed and built. The test results show good filling when the injection pressure was high. Simulations were also carried out, highlighting consistent pressure and filling trends, while revealing limitations tied to the characteristics of the state model. This research indicates promise for expansion injection molding through platen compression but emphasizes the need for the seamless integration of valve action with the injection molding machine for large-scale production.
Keywords: MoldFlow; compression; expansion; injection molding.