Preparation of nitrogen doped hyper-crosslinked polymer-based hard carbon for high performance Li+/Na+ battery anode

Zi-Hui Ma; Tao Yang; Yan Song; Xiao-Dong Tian; Zheng-Yang Liu; Xiang-Jie Gong; Zhan-Jun Liu

doi:10.1016/j.jcis.2024.01.141

Preparation of nitrogen doped hyper-crosslinked polymer-based hard carbon for high performance Li⁺/Na⁺ battery anode

J Colloid Interface Sci. 2024 May:661:436-449. doi: 10.1016/j.jcis.2024.01.141. Epub 2024 Jan 24.

Authors

Zi-Hui Ma¹, Tao Yang², Yan Song³, Xiao-Dong Tian², Zheng-Yang Liu¹, Xiang-Jie Gong¹, Zhan-Jun Liu¹

Affiliations

¹ CAS Key Laboratory for Carbon Materials, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China; Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
² CAS Key Laboratory for Carbon Materials, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China.
³ CAS Key Laboratory for Carbon Materials, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China; Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China. Electronic address: songyan@sxicc.ac.cn.

PMID: 38306751
DOI: 10.1016/j.jcis.2024.01.141

Abstract

Hyper cross-linked polymers (HCPs), as a key precursor of hard carbon (HC) anode materials, stand out because of their capacity for molecular-scale structural design and comparatively straightforward preparation techniques, which are not seen in other porous materials synthesized procedure. A novel synthesis method of HCPs is developed in this paper, which is through the incorporation of functional macromolecules, the structural control and heteroatom doping of the product has been achieved, thus augmenting its electrochemical performance in batteries. In this work, carbonized tetraphenylporphyrin zinc (TPP-Zn) doped HCP-based hard carbon (CTHCP) with stable structure was prepared by Friedel-Crafts reaction and carbonization by using naphthalene and trace TPP-Zn as monomers, dimethoxybenzene (DMB) as crosslinking agent and FeCl₃ as catalyst. The introduction of TPP-Zn, a functional macromolecule with unique two-dimensional structure, realized the pore structure regulation and N doping of the raw carbonized HCP-based hard carbon (CHCP). The results showed that CTHCP had higher mesoporous volume, N content and wider layer spacing than CHCP. In addition, CTHCP anode exhibited excellent Li⁺/Na⁺ storage performance, initial reversible capacity, rate performance and long cycle life. More amount of N-containing (N-5) active sites and mesoporous content in CTHCP anode was the main reason for the improvement of Na⁺ storage effect. While the increased interlayer spacing had a greater effect on the lithium storage capacity. This study uncovered the design rules of HC anode materials suitable for Li⁺/Na⁺ batteries and provided a new idea for the preparation of high-performance HC anode materials.

Keywords: Hard carbon anode materials; Hyper cross-linked polymer; Li(+)/Na(+) battery; N doping; Pore structure regulation.