The reuse of activated sludge as a solid waste is severely underutilized due to the limitations of traditional treatment and disposal methods. Given that, the sulfur-containing activated sludge catalyst doped with cobalt (SK-Co(1.0)) was successfully prepared by one-step pyrolysis and calcinated at 850 ℃. The generation of CoSx was successfully characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), indicating that the sulfur inside the sludge was the anchoring site for the externally doped cobalt. Cobalt (Ⅱ) (Co2+), as the main adsorption site for peroxymonosulfate(PMS), formed a complex (SK-Co(1.0)-PMS* ) and created the conditions for the generation of surface radicals. The SK-Co(1.0)/PMS system showed high degradation efficiency and apparent rate constants for Sulfamethoxazole (SMX) (91.56% and 0.187 min-1) and Sulfadiazine (SDZ) (90.73% and 0.047 min-1) within 10 min and 30 min, respectively. Three sites of generation of 1O2, which played a dominant role in the degradation of SMX and SDZ in the SK-Co(1.0)/PMS system, were summarized as：sulfur vacancies (SVs), the Co3+/Co2+ cycles promoted by sulfur(S) species, oxygen-containing functional groups (C-O). The degradation mechanisms and pathways had been thoroughly investigated using DFT calculations. In view of this, a new idea for the resource utilization of activated sludge solid waste was provided and a new strategy for wastewater remediation was proposed.
Keywords: Antibiotics; DFT calculations; Metal sulfide; Peroxymonosulfate; Sludge biochar.
Copyright © 2024 Elsevier B.V. All rights reserved.