Pressure-sensitive adhesives (PSAs) are widely employed in consumer goods, health care, and commercial industry. Anisotropic adhesion of PSAs is often desirable to enable high force capacity coupled with facile release and has typically been realized through the introduction of complex surface and/or bulk microstructures while also maintaining high surface conformability. Although effective, microstructure fabrication can add cost and complexity to adhesive fabrication. Here, we explore aligned liquid crystalline elastomers (LCEs) as directional adhesives. Aligned LCEs exhibit direction-dependent stiffness, dissipation, and nonlinear deformation under load. By varying the cross-link content, we study how the bulk mechanical properties of LCEs correlate to their peel strength and peel anisotropy. We demonstrate up to a 9-fold difference in peel force measured when the LCE is peeled parallel vs perpendicular to the alignment axis. Opportunities to spatially localize adhesion are presented in a monolithic LCE patterned with different director orientations.
Keywords: directional adhesion; liquid crystalline elastomers; peel; pressure sensitive adhesives; thiol−ene.