Using an inexpensive RGB color sensor for field quantitative assessment of soil accessible Cu(Ⅱ)

Abstract

Field rapid determination of soil accessible Cu(Ⅱ) was important for environmental safety and human health risk assessment. In this study, an inexpensive red, green, and blue (RGB) color sensor was used for quantitative color difference analysis of the colored solution for soil accessible Cu(Ⅱ) with bis-cyclohexanone oxalydihydrazone as color reagent to develop a new method for analyzing soil accessible under field conditions. First, the calibration curve for RGB color sensor method was established in the standard solutions of Cu(II). Then the "hand shaking + standing" field extraction method for accessible Cu(Ⅱ) was developed. Finally, the method was applied in contaminated soils in the laboratory and in the field, and set the values determined by atomic absorption spectroscopy (AAS) as the standard ones. Results indicated that in the range of 0.1-5 mg L^-1 Cu(II), the RGB Euclidean chromogenic difference values were directly linear correlated with the concentration of Cu(II) (R² > 0.999). The interference of Fe(Ⅲ) and Mn(Ⅱ) could be eliminated by adding citric acid. The "hand shaking + standing" field extraction method could effectively extract the accessible Cu(Ⅱ) from soil with the high extraction rates. The concentrations of accessible Cu(II) in various polluted soils determined by RGB color sensor method were consistent with that determined by AAS, with the relative error within ±5%, the relative standard deviation ≤ 20%. The recovery of Cu(II) in RGB color sensor method was between 97% and 105%, which could meet the requirements of trace analysis of accessible Cu(Ⅱ) in the field. The high accuracy and precision of RGB color sensor method was reconfirmed in the rapid field quantitative assessment of soil accessible Cu(Ⅱ). Due to that the RGB color sensor was low cost, rechargeable, portable, mobile, ambient light resistant, the method would have a great potential for the determination of accessible Cu(Ⅱ) in contaminated soils.

Keywords: Bis-cyclohexanone oxalydihydrazone; Field determination; Polluted site soil; RGB color sensor; Soil accessible Cu(Ⅱ).