The optimal design and three-dimensional finite element analysis of CAD/CAM integrated roach attachment

Yun Huang; Jingrong Wang; Liqing Zhu; Liren Liu; Shanshan Gao

doi:10.1016/j.heliyon.2023.e23283

The optimal design and three-dimensional finite element analysis of CAD/CAM integrated roach attachment

Heliyon. 2023 Dec 16;10(1):e23283. doi: 10.1016/j.heliyon.2023.e23283. eCollection 2024 Jan 15.

Authors

Yun Huang¹, Jingrong Wang¹, Liqing Zhu¹, Liren Liu¹, Shanshan Gao¹

Affiliation

¹ State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China.

Abstract

Objectives: To investigate the effect of different designs of movable parts and prosthetic materials on the stress distribution of supporting tissues in mandibular free end dentition defects using three-dimensional finite element analysis of digital Roach attachments.

Material and methods: A 3D model of a patient with Kennedy class I mandibular edentulous conditions was generated, and twelve prosthesis models were applied, combining two designs of removable parts and six types of CAD/CAM restorative materials with different elastic modulus (conventional zirconia, ultra-translucent zirconia, Polyetheretherketone (PEEK), Lithium disilicate, Nanoceramic resin, and resin composite (Paradigm MZ100, 3 M ESPE)). The stress distribution of abutment periodontal ligament, edentulousmucosa, and junction of attachment were analyzed using finite element analysis.

Results: The stress value of the buccal neck of the periodontal ligament and the maximum compressive stress of the distal periodontal ligament of the design with clasp arms were higher than those without clasp arms, while the stress on the junction of attachment and the displacement of the mucosa in the edentulous area were smaller. Restorative materials with high elastic modulus, such as conventional zirconia and ultra-translucent zirconia, are recommended to be used as the fixed part of Roach attachment.

Conclusion: CAD/CAM Roach attachments with clasp arms are recommended for the protection of mucosal soft tissue. Restorative materials with high elastic modulus, such as conventional zirconia and ultra-translucent zirconia, are recommended as the fixed part of Roach attachment for patients with free end defect of mandibular dentition.

Clinical significance: This study provides references for the design with clasp arms and the selection of clinical fixed-movable prosthetic materials. Clinicians should consider the design of attachments and selection of appropriate manufacturing materials carefully to avoid negative impacts on patients' periodontal support tissues.

Keywords: CAD/CAM integrated Roach attachment; Conventional zirconia; Finite element analysis; PEEK; Ultra-translucent zirconia.