Inching-locomotion caterpillars (ILAR) show impressive environmental adaptation, having high dexterity and flexibility. To design robots that mimic these abilities, a novel bioinspired robotic design (BIROD) method is presented. The method is composed by an algorithm for geometrical kinematic analysis (GEKINS) to standardize the proportional dimensions according to the insect's anatomy and obtain the kinematic chains. The approach is experimentally applied to analyze the locomotion and kinematic chain of these specimens:Geometridae-two pair of prolegs (represents 35 000 species) andPlusiinae-three pair of prolegs (represents 400 species). The obtained data indicate that the application of the proposed method permits to locate the attachment mechanisms, joints, links, and to calculate angular displacement, angular average velocity, number of degrees of freedom, and thus the kinematic chain.Geometridaein contrast toPlusiinae, shows a longer walk-stride length, a lower number of single-rotational joints in 2D (3 DOF versus 4 DOF), and a lower number of dual-rotational joints in 3D (6 DOF versus 8 DOF). The application of BIROD and GEKINS provides the forward kinematics for 35 400 ILAR species and are expected to be useful as a preliminary phase for the design of bio-inspired arthropod robots.
Keywords: arthropod animals; bio-inspired robot; biomimetic; engineering design; inching-locomotion caterpillar; robot kinematics.
© 2024 IOP Publishing Ltd.