This publication describes the influence of residue monomers in synthesized pressure-sensitive adhesives based on acrylics on their main properties-tack, peel adhesion, shear strength and shrinkage-in the form of transfer tapes used for joining wooden elements in the furniture industry. The discussed carrier-free adhesive tapes are synthesized via photo-crosslinking and photopolymerization with UV radiation of the photoreactive prepolymers sandwiched between two adhesive siliconized polyester films. The simultaneous crosslinking and polymerization processes carried out under UV lamps placed simultaneously above and below the crosslinked photoreactive polymer layer lead to the production of a carrier-free adhesive film. The preliminary target of these studies was to investigate how the intensity of UV radiation and the time of its exposure affect the viscosity of the photoreactive compositions and the content of unreacted monomers in them. Next, the influence of the crosslinking agent concentration and UV irradiation time on the content of unreacted monomers after the crosslinking process was tested. The last step of the studies was the investigation of the influence of the residue monomer concentration on the application properties of the obtained pressure-sensitive adhesive layers. The typical PSA application properties were tested on the wood samples: tack, peel adhesion, shear strength (cohesion) and shrinkage.
Keywords: UV radiation; peel adhesion; photo-crosslinking; photopolymerization; photoreactive prepolymers; residue monomers; shear strength; shrinkage; tack; transfer tapes.