This study aimed to elucidate the influence of horizontal resistance loads on the spatiotemporal and ground reaction force (GRF) variables during maximal sprint acceleration. Nine male sprinters (20.2 ± 1.2 years; 175.3 ± 4.5 cm, 69.7 ± 6.1 kg) performed sprint-running with six loading conditions of one unresisted and five resisted loads of 4, 6, 8, 10, and 12 kg using a resistance training device with intelligent drag technology. During the trials, the GRFs for all steps were determined using a 50-m force plate system. The spatiotemporal and GRF variables at running velocity of every 0.5 m/s were obtained and compared across the loading conditions. The maximal running velocity under 0, 4, 6, 8, 10, and 12 kg loading conditions were 9.84 ± 0.41, 8.55 ± 0.41, 8.09 ± 0.33, 7.62 ± 0.34, 7.11 ± 0.31, and 6.71 ± 0.29 m/s, respectively. ANOVA revealed significant main effects of load on the measured variables (η2 = 0.236-0.715, p < 0.05), except for stance-averaged anteroposterior GRF and braking impulse. However, the observed differences between the loading conditions were small, with approximately 4% (1.3-7.5%) for the GRF variables and approximately 9% (1.2-22.3%) for the spatiotemporal variables. The present study indicates that horizontal resistance load in sprint acceleration has little impact on the spatiotemporal and GRF variables at a given running velocity. In contrast to a general recommendation, one should adopt a heavy load in resisted sprint aiming to improve performance in the earlier stage of maximal sprint acceleration.
Copyright: © 2023 Sugisaki et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.