Extractives have an impact on the processing and commercial value of wood. Ultrasound is an environmentally friendly technology commonly employed to reduce the extractive content and thus enhance the permeability of wood. This study aimed to understand the migration mechanism of extractives inside wood during ultrasonic treatment, which may help to obtain the desired wood properties. The extractive distribution of Ailanthus altissima was observed by using stereo microscopy, optical microscopy, and scanning electron microscopy, the extractive content was determined, and the relationship between the concentration of water-soluble extractives and absorbance was measured using a UV/Vis spectrophotometer, and the migration model of extractives was studied using layered extraction by innovatively combining the weight and the absorbance methods. The results revealed that the extractives were predominantly distributed in the vessels and diminished after ultrasonic treatment. The extractive content gradually decreased over time (0 ∼ 5 h), with a rapid decline observed within the first 2 h. The concentration of the water-soluble extractives exhibited a proportional relationship with the absorbance. Through the comparison of the layered-extractive concentration, accumulating evidence suggested that the migration of the extractives was a dynamic process, which included the extractives migrating towards easy-extracted area, moving along the direction of ultrasound propagation inside the wood, and leaching out of wood during ultrasonic treatment.
Keywords: Ailanthus altissima; Extractives; Migration model; Ultrasonic treatment.
Copyright © 2023. Published by Elsevier B.V.