Hydraulic retention time optimization achieved unexpectedly high nitrogen removal rate in pilot-scale anaerobic/aerobic/anoxic system for low-strength municipal wastewater treatment

Bioresour Technol. 2024 Feb:393:130128. doi: 10.1016/j.biortech.2023.130128. Epub 2023 Nov 29.

Abstract

Applications of post-denitrification processes are subjected to low reaction rates caused by a lack of carbon resources. To offer a solution for reaction rate promotion, this research found a pilot-scale anaerobic/aerobic/anoxic bioreactor treating 55-120 m3/d low-strength municipal wastewater for 273 days. A short hydraulic retention time (HRT, 5-6 h) and a high nitrogen removal rate (63.2 ± 9.3 g-N/m3·d) were achieved using HRT optimization. The effluent total nitrogen concentration was maintained at 5.8 ± 1.4 mg/L while operating at a high nitrogen loading rate of 86.2 ± 12.8 g-N/m3·d. The short aeration (1.25-1.5 h) minimized the Glycogen loss. The endogenous denitrification rate increased to above 1.0 mg/(g-VSS·h). The functional genus Ca. Competibacter enriched to 2.3 %, guaranteeing the efficient post-denitrification process. Dechloromonas rose to 1.1 %, aiding in the synchronous phosphorus removal. These findings offered fresh insights into AOA processes to achieve energy/cost-saving wastewater treatment.

Keywords: Biological nitrogen removal; Continuous Plug-flow process; Efficient wastewater treatment; Endogenous denitrification; Mainstream.

MeSH terms

  • Anaerobiosis
  • Bioreactors
  • Denitrification
  • Nitrification
  • Nitrogen
  • Phosphorus
  • Sewage
  • Waste Disposal, Fluid*
  • Water Purification*

Substances

  • Sewage
  • Nitrogen
  • Phosphorus