Controllable bonded prestress represents an innovative advancement stemming from retard-bonded prestress systems, distinguished by its intrinsic controllability in bonding. The controllable bonded binder can be artificially heated and cured rapidly through DC heating after the completion of prestressed tension, allowing for enhanced control over the process. FLUENT simulates controllable bonded prestressed structure's temperature field, yielding a 1.73% max error validated against measured data. Based on the theory of heat transfer, the maximum error of the calculated temperature field of the controllable bonded test beam under DC heating using the Stehfest numerical algorithm is 1.28%, which exhibits a strong alignment with both simulated and measured results. The parameter analysis identifies current, binder thickness, and steel-strand diameter as key temperature distribution influencers. The relationship between the current and heating time follows a quadratic inverse pattern. Increasing the heating current can significantly reduce the duration of heating. Under identical heating conditions, the temperature of the controllable binder is directly proportional to its thickness. A higher thickness results in a higher temperature. Additionally, larger diameters of steel-stranded wire lead to a lower heating efficiency.
Keywords: controllable bonded prestressed concrete; electrothermal method; experimental verification; numerical simulation; temperature field.